PAGE 2 OF 4
0414 IH-4124
4. Slide the folding nose extension brackets over the
14mm bolts. (See Figure 3A)
NOTE: The bolt holes on bracket are NOT
centered. Make sure the bolt holes are closest
to the back of truck before securing.
(see Figure 3B)
5. Secure with locknuts but dO nOt tighten.
AttAcH AxlE And WHEElS
1. Insert axle through hole in axle supports. Align holes
in axle with grooves on back of the axle supports. use
a hammer to tap in the round pins. (See Figure 4)
2. Slide (3) washers onto end of the axle. Slide a wheel
onto each end of the axle. Slide on another washer.
(See Figure 5)
3. Insert a cotter pin through the holes in each end of
axle. Bend cotter pin using pliers to secure wheel.
Wheels should spin freely. (See Figure 5)
4. tighten all locknuts.
AssEMBlY cONTINuED
Figure 3B
Figure 3A
Figure 4
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com
Figure 5