PAGE 2 OF 2
0113 IH-3630
HARDWARE INCLUDED
•
(2) 3/8" x 3/4" Bolts
•
(2) 3/8" x 3" Bolts
•
(4) 3/8" Flange nuts
ASSEMBLY OF ADD-ON TABLES
1. Repeat steps on page 1 for leg assembly.
2. With the aid of a helper, align add-on table to
starter table. The holes on the underside of both
table tops should line up. Install (2) 3/8" x ¾" bolts
and nuts through holes provided. (See Figure 5)
NOTE: To create a flat working surface
between tables, you may need to lift
the corners of add-on table when nuts
are tightened.
3. Unfold remaining flat braces on add-on table
and line up with leg assembly on starter table.
Remove starter leg brace bolt. Install braces
from both tables to leg assembly using the
same starter leg brace bolt. (See Figure 6)
4. After all starter and add-on tables have been
assembled, all nuts can be tightened to 40-50
foot pounds.
(2) 3/8 x 3/4" Bolts
and Nuts
Starter Leg
Brace Bolt
Starter
Table
Add-On
Table
Flat Brace
ADD-ON TABLE INSTRUCTIONS
Figure 5
Figure 6
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com
