PAGE 5 OF 15
0321 IH-3619
ATTACHING HANDLE
1. Place the locking handle (12) on the right hand door
and fasten with two slotted bolts and lock washers.
(See Figure 9)
2. Turn the handle to the open position (parallel to the
ground) and hook the locking cam (13) over the
square shank of the door handle. The latch must be
facing downward as shown. (See Figure 10)
3. With the handle still in the open position, hook the
locking bar (14) to the locking cam (13). (See Figure 11)
4. Hold the lock bars in position while sliding the lock bar
guide (15) over the lock bar ends and through the door
slots. (See Figure 12)
5. Place the cotter pin (16) through the hole in the shank
of the door handle. (See Figure 13)
6. Place dummy handle (17) on left hand door and
fasten with 2 bolts and lock washers.
ASSEMBLY CONTINUED
Figure 9
Figure 10
12
13
Figure 11
Figure 12
Figure 13
16
14
15
13
1-800-295-5510
uline.com
