PAGE 2 OF 2
0721 IH-2274
OPERATION CONTINUED
TROUBLESHOOTING
CUSTOMIZING CONTROL SETTINGS
Dispensing, delay and paper length can be customized
using three control setting switches behind cover in right
inside corner.
1. DISPENSE (Switch #1): Upper Position = maximum
paper saving. Center Position = normal (factory
setting). Lower Position = minimum paper saving.
2. DELAY (Switch #2): Upper Position = 3 sec. delay.
Center Position = 2 sec. delay. Lower Position = 1
sec. delay (factory setting).
3. PAPER LENGTH (Switch #3): Upper Position = 15"
length. Center Position = 12" length (factory setting).
Lower Position = 9" length.
INDICATOR LIGHT
When cover is closed and unit powers up, LED indicator
at right, top corner of paper chute will flash once. After
each dispense, Indicator will flash once to indicate unit
is ready for next use. LED will flash continuously every 1.5
seconds when batteries need replacement.
OPERATING ISSUE
CAUSES
RECOMMENDATIONS
Unit will not dispense.
Cover is not closed and secured.
LED light for batteries is not flashing.
Paper is not loaded properly.
Ensure cover is closed and securely
latched.
Check LED light for battery replacement
signal. Make sure batteries are installed
and oriented properly.
Remove and re-install batteries.
Confirm that paper is loaded properly
and roll turns freely. Check paper path for
obstructions.
1-800-295-5510
uline.com
