PAGE 1 OF 18
1120 IH-2171
PEDESTAL WORKBENCHES
1-800-295-5510
uline.com
H-2171, H-2172, H-2173, H-2174
H-2298, H-2299, H-5927, H-5928
H-5929, H-5930
2 PEDESTAL ASSEMBLY
NOTE: For pedestal workbench featuring
1 pedestal and 1 leg assembly, see page 3.
TABLETOP PRE-ASSEMBLY
1. Place tabletop on a smooth, non-marring surface
with top side facing down.
2. Partially insert eight #14 x 3/4" hex head slotted
wood screws into pre-drilled holes in top, leaving
approximately 1/8" between top and screw heads.
Use holes located 6½" from the front and back
edges, 13½" apart. (See Figure 1)
MOUNTING WOOD OR LAMINATE TOP TO PEDESTALS
1. Remove top two drawers or open cabinet doors.
(See Figure 2)
2. Place cabinets squarely 30" apart for 60" tops,
42" apart for 72" tops, or 66" apart for 96" tops.
3. Set top assembly on cabinets, placing screw heads
in keyhole slots, and slide forward. (See Figure 2)
4. Position top so that ends of top are flush with cabinet
sides and tighten all screws.
5. Replace drawers or close cabinet doors.
NOTE: For 96" wood or laminate top workbench
assembly, continue to page 2.
Figure 1
WOOD OR LAMINATE TOP ASSEMBLY
HARDWARE
Figure 2
FOR WOOD OR LAMINATE TOPS – See pages 1-4.
FOR STEEL TOPS – See pages 4-6.
TOOLS NEEDED
Electric Drill
(Optional)
Phillips Head
Screwdriver
Flathead
Screwdriver
7/16" Wrench
1/4"-20 x 5/8" Bolt x 22
(Steel Top)
#14 x 3/4" Hex Head Slotted
Wood Screw x 16 ( x 20 for 96" Top)
Lock Washer x 4
( x 10 for Steel Top)
Nut x 4
( x 10 for Steel Top)
Para Español, vea páginas 7-12.
Pour le français, consulter les pages 13-18.
