PAGE 3 OF 9
0421 IH-1993
REPLACING THE DRIVER BLADE/ANVILS
TO REPLACE THE DRIVER BLADE:
1. Remove six screws
holding the rear
body to the front
section. (See Figure 10)
2. Remove the rear
body with magazine.
3. Replace the driver
blade. (See Figure 11)
4. Assemble parts in
reverse order.
NOTE: If changing the anvils, always change
both at the same time.
TO REPLACE THE ANVILS:
1. Remove the driver
blade. (See Figure 11)
2. Remove the screws.
3. Replace the anvils.
4. Assemble parts in
reverse order.
MAINTENANCE CONTINUED
Rear Body
Screw
Figure 10
Screw
Anvils
Driver
Blade
Screw
Figure 11
1-800-295-5510
uline.com
