PAGE 2 OF 6
0721 IH-1918
NOTE: The dispenser must be loaded on the left
side first.
1. Slide dispenser door to right. (See Figure 8)
2. Insert roll on left side of dispenser by placing it over
the angled notches on either side. (See Figure 9)
NOTE: The leading edge of the paper should
be in the front of the roll.
3. Slide door to left and insert second roll.
(See Figure 10)
4. Temporarily mount the dispenser onto the wall,
sliding the bracket into place below the back
notches. (See Figure 4)
5. Mark the final two holes onto the wall where screws
will be drilled. (See Figure 5)
6. Remove the dispenser and drill into wall. Insert wall
anchors if necessary. (See Figure 6)
7. Place dispenser back onto the mounting bracket
and insert the last two screws. (See Figure 7)
MOUNTING INSTRUCTIONS CONTINUED
Notches
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 10
LOADING INSTRUCTIONS
Figure 9
Angled
Notches
1-800-295-5510
uline.com
