PAGE 2 OF 6
0520 IH-1060
3. Place side support pieces (B) in the middle of the
upright posts at desired middle shelf height.
(See Figure 2)
4. Connect the two upright post assemblies by inserting
front/back supports (C) at the top and bottom of each
upright post. (See Figure 3)
NOTE: Be sure the supports are fully seated before
continuing with assembly.
NOTE: Front/back supports should be positioned
with ledge on top.
5. Repeat step 4 for installation of all other front/back
supports.
6. Attach shelf supports (D) at each level by placing the
keyhole slots (on shelf support) over the rivets (on the
inside of the front/back support) and tapping them into
place. (See Figure 4)
Recommended number of shelf supports per shelf are as
follows:
36" / 48" / 60" − 1 Shelf Support
72" − 2 Shelf Supports
96" − 3 Shelf Supports
7. Set boards or wire (E) on top of shelf supports, side
supports, and front/back supports. (See Figure 5)
ASSEMBLY CONTINUED
Figure 3
Figure 4
Figure 5
Figure 2
B
C
D
E
E
A
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com
