PAGE 1 OF 24
0323 IH-1030
1-800-295-5510
uline.com
PNEUMATIC ROLL
STAPLER
H-1030
H-1031
Para Español, vea páginas 9-16.
Pour le français, consulter les pages 17-24.
SPECIFICATIONS
SAFETY
Dimensions (L x H x W)
9 x 9 x 4.5"
Weight (Without Fasteners)
5.5 lb.
Maximum PSI (Compressed Air)
110 psi
Recommended Operating Pressure
70-110 psi
Air Consumption
2.4 CFM
Staple Specification
S-860 RR1-58 Roll
Staple Specification
S-861 RR1-34 Roll
Staple Capacity
1,000 Staples
Noise Level
89 dBA
• Read the manual and understand all safety
instructions before operating the tool. If you have
questions, contact Uline at 1-800-295-5510.
• Never point the stapler towards you or anyone else.
• Never use flammable gases as a power source for
the stapler. Only use filtered, compressed air.
• Never use gasoline or other flammable liquids to
clean the stapler. Vapors left on the stapler could
ignite and cause the tool to explode.
• Do not exceed 110 psi of air pressure when
operating the stapler.
• Disconnect the stapler from the air supply before
making adjustments, cleaning or clearing jams
and when not in use.
• Do not pull the trigger when carrying or holding
the stapler.
• Never carry the stapler by the hose or pull on
the hose to move the stapler.
• Always wear protective equipment; i.e. safety
glasses with side shields, hearing protection and
head protection.
• Do not use a check valve or any other fitting which
allows air to remain in the stapler.
• Do not place your hand or any other body part in
the staple clinching area or adjustment window
when connecting or disconnecting the air supply.
• Ensure that anyone in the vicinity wears safety
protection.
• Check and replace any damaged or worn
components on the stapler
