PAGE 3 OF 3
0812 IH-3518
ADjUSTInG THE nUMBER OF CUSHIOnS (COnTInUED)
To pause the machine during the run press the start/stop
button.
To restart the machine press start. Machine will resume
and continue to required quantity.
RESTARTInG AFTER THE ROLL OF FILM HAS RUn OUT
When the roll has finished, the display on the control
panel will read OUT OF FILM. Reload a new roll and
press the START button.
CUSTOMER ASSISTAnCE MESSAGES
In the instance of an error occurring the following
messages may appear on the control panel:
01 Under Voltage
03 Under Current
02 Over Voltage
04 Over Current
If an error message appears please follow the
instructions below:
1. Press the emergency stop button
2. Leave for 30 seconds
3. Retry the machine
OPERATING INSTRUCTIONS CONTINUED
OPERATING ISSUE
RECOMMENDATIONS
Machine does not start
Check that the emergency stop button is not depressed
Check if main power is on
Film comes off guide bar (Fig 1: ‘D’)
(Display will show ‘Out of Film’ message)
Check that the roll has been properly loaded onto the axle
Check that the film has been wound around the rollers in the correct manner
Check bags for overinflation
Check film edge is not dragging against machine chassis
Heat seals are not strong enough
Check on overinflation
Change the Operator Settings on the Control Panel
If this does not work, a trained operator can change the Engineering Settings
Heat seals are burning through
Reduce the heat
Reduce the Blower as overinflation can cause burning through, particularly on the
smaller cushion size
Cushions deflate
Usually due to the incorrect amount of heat in the heat seals. This may occur if too
much or too little heat is used
Change settings accordingly
Check on overinflation
Film not sealing
Check for damaged belts
Film jam
Remove jam and press the START button to restart production
Check for damaged belts
Film winding around heat seal/rollers
Check for damaged belts
Reduce temperature
TROUBLESHOOTING
Recommended: a daily inspection of belts will help prevent the above issues.
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com