2115R — Refrigerator
08/2006
5
www.U-LineService.com
Product Dimensions
Please note that the unit has adjustable feet that can add
one additional inch to height during leveling or to match
adjacent cabinets (see
Figure 33
on
Page 13
).
Door Swing/Clearances Information
Black and White units have a zero clearance for the door
to open 90° (see
Figure 3
). Stainless Steel models require
a minimum of 2-1/8" door clearance to accommodate the
handle if the unit is installed next to a wall or similar type
of structure.
Reversing the Door
(Black and White Units Only)
All U-Line units
(except Stainless
Steel models) may be
left- or right-hand
opening. The door
opening is easily
reversed by moving
the hinge hardware
to the opposite side.
The top hinge
hardware will be
used on the bottom
of the other side and
the bottom hinge
hardware will be
used on the top of
the other side (see
Figure 4
).
To reverse the door:
1. Remove top
hinge screw pin
from door (Phillips screwdriver) (see
Figure 5
).
Remove door by tilting forward and lifting off bottom
hinge pin.
2. Remove plastic screw plugs (3 each, top and bottom)
from new hinge location. Do not discard (see
Figure 6
).
3. Remove top hinge (3 screws), reinstall hinge screw pin,
and remount on opposite side BOTTOM (see
Figure 7
).
23-1/4"
Including
Handle
34-1/8"
14-15/16"
14-15/16"
34-1/8"
25-3/8"
Including
Handle
Black and White
Stainless Steel
Figure 2
1/4" Min.
Wall
21"
Wall
21"
16-1/2"
16-1/2"
2-1/8" Min.
90
°
Door Swing
90
°
Door Swing
Black and White
Stainless Steel
Figure 3
ULIN_0015_A
Figure 4
Screw Plugs
Figure 6
ULIN_0133_A
Figure 5
