background image

2115R, 2175R

5

IMPORTANT

IMPORTANT

PLEASE READ all instructions completely before 
attempting to install, operate, or service your unit.
• Proper installation procedures must be followed 

if this unit is being initially installed, or is moved 
to a new location after being in service. An 
INSTALLATION GUIDE for your unit, providing 
complete installation information is available 
from U-Line Corporation directly, and must be 
consulted before any installation is begun. U-Line 
contact information appears on the rear cover of 
this guide.

• This unit requires connection to a grounded 

(three-prong), polarized receptacle that has been 
placed by a qualified electrician in accordance 
with applicable electrical codes.

Safety Alert Definitions

Safety items throughout this guide are labeled with a 
Danger, Warning or Caution based on the risk type:

DANGER

Danger means that failure to follow this safety 
statement will result in severe personal injury or 
death.

WARNING

Warning means that failure to follow this safety 
statement could result in serious personal injury 
or death.

CAUTION

Caution means that failure to follow this safety 
statement may result in minor or moderate 
personal injury, property or equipment damage.

General Precautions

Use this appliance for its intended purpose only and 
follow these general precautions along with those listed 
throughout this guide:

DANGER

RISK OF CHILD ENTRAPMENT. Before you throw away 
your old refrigerator or freezer, take off the doors 
and leave shelves in place so that children may not 
easily climb inside.

WARNING

SHOCK HAZARD - Electrical Grounding Required.
• Never attempt to repair or perform 

maintenance on the unit until the electricity 
has been disconnected.

• Never remove the round grounding prong from 

the plug and never use a two-prong grounding 
adapter.

• Altering, cutting of power cord, removal of 

power cord, removal of power plug, or direct 
wiring can cause serious injury, fire and/or loss 
of property and/or life, and will void the 
warranty.

• Never use an extension cord to connect power 

to the unit.

• Always keep your working area dry.

CAUTION

• Use care when moving and handling the unit. Use 

gloves to prevent personal injury from sharp 
edges.

• If your model requires defrosting, DO NOT use any 

type of heater to defrost. Using a heater to speed 
up defrosting can cause personal injury and 
damage to the inner lining.

IMPORTANT

IMPORTANT

• Do not lift unit by door handle.
• Never install or operate the unit behind closed 

doors. Be sure front grille is free of obstruction. 
Obstructing free air flow can cause the unit to 
malfunction and may void the warranty.

• Failure to clean the condenser every three months 

can cause the unit to malfunction. This could void 
the warranty.

• Allow unit temperature to stabilize for 24 hours 

before use.

• If your model requires defrosting, never use an 

ice pick or other sharp instrument to help speed 
up defrosting. These instruments can puncture 
the inner lining or damage the cooling unit.

• Use only genuine U-Line replacement parts. 

Imitation parts can damage the unit, affect its 
operation or performance and may void the 
warranty.

3 Safety Precautions

Summary of Contents for Echelon 2115RS00





















Reviews: