3
Install Tower on Keg Refrigerator
Note: Save gasket and cap plug for conversion back to a standard refrigerator.
1. Remove four screws and lift off cap plug and gasket to reveal mounting hole on top of refrigerator.
Note: These instructions are designed for a standard 36" countertop application.
If your keg refrigerator is new out of the box, do not remove the protective film on the stainless exterior until the
tower is installed.
2. Insert tap assembly tubing through the provided gasket and then all the way into the refrigerator.
3. Insert and tighten four screws to secure tower to keg refrigerator.
4. Install faucet onto the tower: Line up teeth on the outside of the faucet with the teeth inside the shank.
6. Screw the handle onto the faucet.
5. Screw the coupling nut onto the faucet and tighten with the faucet wrench.
