QUICK START GUIDE
u-line.com
8
USER GUIDE
u-line.com
Control Operation
Control Operation
CONTROL FUNCTION GUIDE
FUNCTION
COMMAND
NOTES
ON/OFF
Press and release
Unit will immediately turn On or OFF
Adjust Temperature
Press or and release
When the display is flashing, press or to
adjust the set point temperature. Note: temperature
displayed is the actual temperature inside unit
Toggle between
ºF / ºC
Hold and for 5 seconds
The display will change units
Leave interior light on
Press and release to leave interior
light on for 12 hours; press again to
deactivate
After 12 hours, factory default is restored; light will
turn on when door is open
Hide Display
Hold and press
Display will turn off when door is closed. Unit will
continue to operate. Repeat command to turn on
display
Adjust light color
While holding press and release
to scroll through lighting options
Option Open Door Closed Door
00
White White
0 1
Blue Blue
02
White Blue
Light will be set at full intensity when door is open,
and 50% intensity when door is closed.
Enable Sabbath Mode
Press and hold for 5 seconds and
release
The oF / o
C symbol will flash briefly after 5 seconds.
Interior light and display will go dark and remain so
until user resets mode - unit continues to operate
Disable Sabbath Mode
Press and release
Display and interior light return to normal operation
Showroom Mode
Hold and for 5 seconds
The ºF / º
C symbol will flash. Display will be lit and
interior light will function. Unit will not cool. Repeat
command to return to normal operation
This unit is Star-K certified. See www.star-k.org
for more details.
DOOR ALERT NOTIFICATION
When the door is left open for more than 5 minutes:
•
A tone will sound for several seconds every minute
•
will appear in display
•
Closed door to silence alert and reset
Temperature displayed reflects actual
temperature inside unit.
Initial startup requires no adjustments. When plugged
in, the unit will begin operating under the factory default
settings. If the unit was turned off during installation,
simply press and the unit will immediately switch on. To
turn the unit off, press .
If the temperature displayed is different than selected, the
unit is progressing towards the selected temperature. Time
to reach set point varies based upon ambient temperature,
temperature of product loaded, door openings, etc. U-Line
recommends allowing the unit to reach set points before
loading.
NOTICE
First Use
Control Operation
