U-Line BT H-1003 Instructions Manual Download Page 2

PAGE 2 OF 15 

0421 IH-1003

OPERATIONS

SAFETY CONSIDERATIONS 

•  Avoid cornering at high speed.

•  Pay particular attention to other personnel as well 

as fixed and moving objects within the working area 
and thereby avoid accidents.

•  Always pull the truck behind you if the load blocks 

the view.

CAUTION! When operating on inclines, the truck 

must be operated with extreme care with the 
load facing downwards in the direction of the 
incline. Use trucks with a hand brake.

WARNING! Braking shall take place gently and 
carefully to prevent the load from slipping off 
of the forks and causing damage.

CAUTION! Adapt the speed according to the 

incline and surface.

•  Always keep a safe distance from the edges of 

loading docks and loading ramps. Be attentive to 
marked risk areas.

•  Before the truck is driven on to a loading ramp 

ensure that the ramp is correctly secured and has 
the necessary load bearing capacity. Drive slowly 
and carefully across the ramp.

•  When the truck is driven on to another vehicle, make 

sure the vehicle is stable and that the brakes have 
been applied correctly.

•  Before the truck is driven into a lift, the operator must 

make sure the lift is approved for the total weight 
of the truck, the load, operator, and any other 
passengers in the lift. When entering the lift, the load 
must enter first, not the driver. No other personnel 
should be in the lift when the load or truck enters or 
leaves the lift.

•  Any accidents that have caused personal injury 

or damage to buildings or equipment must be 
reported to the supervisor. Incidents and faults on 
the truck shall also be reported.

•  Handling loads

•  Only handle loads that are within the truck's 

permitted lifting capacity. The length and width of 
the forks shall be adapted to the load's shape and 

dimensions.

•  Only loads that are stable, evenly distributed on the 

forks and safely arranged should be handled.  

(See Figure 1) 

WARNING! Risk of overturning. Cornering: The 
load can fall from the truck if the speed is too 
high and cause damage. Cornering with a 
high load must be performed with extreme 
care.

WARNING! The truck may only be used to 
carry goods. It is prohibited to use the truck to 
transport persons, and as result it must not be 
used as a “scooter”.

WARNING! Risk of crushing under forks. The risk 
of crushing can occur when lowering or by a 

defect in the hydraulic system and accidental 

lowering. Be attentive to the risks of crushing 
and ensure that other persons are not in the 
immediate vicinity of the truck.

CAUTION! Risk of crushing. If the hands are 

placed on the outside of the handle, there 
is a risk of crushing in narrow spaces. There 
is also a risk of crushing if the hands are kept 
between the tow bar and the tow bar bracket, 

or between the top cap and the hydraulic unit. 

Because of this, be sure to keep the hands only 

on the top of the handle when operating the 
truck. (See Figure 2) 

 
 
 

A

B

Figure 1

Summary of Contents for BT H-1003
















Reviews: