QUICK START GUIDE
u-line.com
28
USER GUIDE
u-line.com
Interior Adjustments
All 5 Class models feature side mounted rack supports
with 19 adjustment positions.
All refrigerators ship with 3 Slide and Secure storage bins.
Remove and reposition as desired.
Slide and Secure Storage Bin Removal
1.
Empty and remove bin.
2. Firmly grasp both sides of storage bin frame and lift
front end slightly (about 1/4”) to center the pin in the
slot.
3. Pull frame towards you until all pins are clear of the
slots. If only repositioning the frame, do not remove
completely - go to “Storage Bin Installation” Step 2.
4. Slightly tilt one side. Gently pull frame towards you to
remove from unit.
Note: Take care when removing frame to avoid
scratching interior of unit.
5. Once removed, retract the slides.
Note: The slides on the frame have a thin coating
which is used to block moisture and provide
lubrication. Use care when handling
.
Slide and Secure Storage Bin Installation
1. Insert empty storage bin frame into unit with one side
tilted slightly downward until back pin is between front
and rear rail supports.
2. Tilt frame back to horizontal and line up 2 back pins
with rear rail support. Line up left side of frame with
rear and front rail support. Continue inserting frame
until both pins engage. The front will set down slightly
and lock into place. Repeat on right side.
3. Fully extend frame, position bin over frame and lower
(rear first) into position.
Slide and Secure Storage Bins
Glass inserts are designed so bottles and cans sit flat. The
inserts may be removed when storing produce or other
items. The ridges in the bottom facilitate air flow.
Clean the storage bins with soap and water.
Center
the pin
Center
the pins
Front Pin
Back Pin
USER GUIDE
Ice
u-line.com
Ice
The Nugget Ice Machine produces cylindrical bits of
compressed ice approximately
3
/
4
” x
1
/
2
”.
Ice is produced until the machine senses the bin is full.
As ice slowly melts in the bin, the level of ice drops and
ice production resumes. This ensures a constant supply
of fresh ice is always available.
The factory default ice setting is 0, which produces a
firm and compact ice nugget. U-Line’s exclusive U-
Choose™ ice adjustability feature allows you five levels
of adjustment from 0 to -5. At -5 the ice is soft and
chewable.
To adjust the ice density:
1. Hold
for 5 seconds - display will flash current ice
setting
2. Adjust using
or
3. Confirm setting by pressing
NUGGET ICE MACHINE
