U-Line 3024DWR, User Manual & Service Manual, Page: 20 / 68

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
Drawers 4
USER GUIDE
u-line.com
2. Reposition the slide so it
is the same distance
from the bottom of the
liner as the other slide.
Measure to confirm.
3. Mark new drilling holes using different sets of
mounting holes on the slide.
Note: Front location holes are shown. Corresponding
rear holes will also need to be marked.
4. Drill all the new holes with a #30 drill bit.
5. Remount the slide.
RE-INSTALLATION OF DRAWER
CAUTION
Use care when handling the drawer. Drawer
edges, drawer rail and the unit’s slide may be
sharp.
1. Set the drawer’s rails onto the slides.
2. Re- install the rails’ mounting screws.