background image

USER GUIDE

 Control Operation 4

u-line.com

SAFETY • INSTALLATION & INTEGRATION • 

OPERATING INSTRUCTIONS

 • MAINTENANCE • SERVICE

4. To exit Customer Menu, press   to scroll to the 

bottom of the display and press   to select “Exit”.

Actual Temps

The Actual Temps option displays the actual temperature 
of each zone and evaporator, as well as ambient 
temperature. 

1. To view actual temperature, press   and select 

“Actual Temps” from the Customer Menu.

2. Press   or   to scroll through available information.

3. To return to the Customer Menu, press   and select 

“Return to Menu”.

Energy Saver Mode

Energy Saver mode reduces overall energy consumption 
by altering user set point, differential, lighting and tone 
settings. When in Energy Saver Mode a small leaf icon will 
be displayed on the main screen.

1. To enter Energy Saver Mode, first select Energy Saver 

from the Customer Menu.

2. Press   to select “Off” in the menu. 

3. Press .

4. Press   or   to change the selection from Off to On.

5. Press   to confirm your selection.

6. To return to the Customer Menu, press  .

7. To cancel Energy Saver Mode simply return to the 

Customer Menu, select Energy Saver and change “On” 
to “Off”.

Languages

The U-Line 3000 Series of models supports a number of 
display languages including English, Spanish, French, 
Italian and German. 

1. To change display language select Languages from the 

Customer Menu.

2. Press   to select “English”.

3. Press  . “English” will begin to flash.

4. Press   or   to cycle through the available 

languages.

5. Press   to confirm your choice.

Up

Select

Down

RETURN TO MENU

ACTUAL TEMPS

BIN TEMP = 1.6

COND TEMP = 45.5

Can be displayed in Celsius

    

Up

Select

Down

Energy Saver Mode

Indicator

WHITE WINE 

50° F

Can be displayed in Celsius

Up

Select

Down

RETURN TO MENU

LANGUAGES

ENGLISH

Summary of Contents for 3018WC




















































Reviews: