U-Line 1224BEV User Manual Download Page 40

USER GUIDE

Warranty 2

u-line.com

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • 

SERVICE

7. If a product defect is discovered during the applicable 

warranty period, you must promptly notify either 
U-Line at 8900 N. 55th Street, Milwaukee, Wisconsin 
53223 USA or at +1.800.779.2547 or the dealer from 
whom you purchased the product. In no event shall 
such notification be received later than 30 days after 
the expiration of the applicable warranty period. U-Line 
may require that defective parts be returned, at your 
expense, to U-Line’s factory in Milwaukee, Wisconsin, 
for inspection. Any action by you for breach of 
warranty must be commenced within one year after 
the applicable warranty period.

8. THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL 

OTHER WARRANTIES, EXPRESS OR IMPLIED, 
INCLUDING ANY IMPLIED WARRANTY OF 
MERCHANTABILITY OR IMPLIED WARRANTY OF 
FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH 
ARE DISCLAIMED. U-Line’s sole liability and your 
exclusive remedy under this warranty is set forth in the 
paragraphs above. U-Line shall have no liability 
whatsoever for any incidental, consequential or special 
damages arising from the sale, use or installation of 
the product or from any other cause whatsoever, 
whether based on warranty (express or implied) or 
otherwise based on contract, tort or any other theory 
of liability.

Some states do not allow limitations on how long an 
implied warranty lasts or the exclusion or limitation of 
incidental or consequential damages, so the above 
limitations may not apply to you. This warranty gives you 
specific legal rights, and you may also have other rights 
which vary from state to state.

Warranty 6/2014 Rev.G

Summary of Contents for 1224BEV









































Reviews: