Give us a chance to make it right.
TOLL FREE: 1-866-528-8364
Monday - Friday, 8am-5pm, ET.
Page 3
#1092 Wingback Arm Chair
Assembly Instructions
Step 2 - Lay the
Back Frame
(Part A) on a flat surface. Pull the Velcro® attached dust cover on the
bottom of the Seat Frame (Part B) back to expose the inner frame. Align the bolt holes on the
underside of the Seat Frame with the corresponding bolt holes in the Back Frame like shown
below. Insert two Bolts with Washers (Part H) clockwise through the Seat Frame and into the
Back Frame. Tighten the bolts using the Allen Wrench (Part I). Do not over tigthen the bolts.
Step 3 - Lay the Right Arm (Part C) on a flat surface. Insert one Wood Dowel (Part G) through the
corresponding hole in the Arm located just below the top bolt hole. Attach the Leg (Part E) by
threading the Leg clockwise into the threaded insert located on the front corner of the Arm.
Tighten the leg until it is firmly seated and in line with the Arm frame.
-- Repeat Step 3 on the Left Arm (Part D).
B
A
G
G
E
E
D
C
H
H
I
