U-Boat U-42, Cleaning & Maintenance Instructions

Page: 15 / 17

ISTRUZIONI PER U-42 AUTOMATICO
U-42 AUTO INSTRUCTIONS
RIMESSA ORA:
1. Portare la corona in posizione di carica (orizzontale);
2. Caricare l’orologio, se necessario;
3. Estrarre delicatamente la corona al primo scatto (posizione 1) e ruotarla
lentamente per effettuare la correzione dell’ora.
5. Premere la corona e riportarla nella posizione iniziale.
Movimento calibro U-28: riserva di carica 38 ore.
TIME SETTING:
1. Put the crown in the winding position and wind the watch if necessary by
turning the crown forwards until it stops;
2. Time setting: pull gently the crown out to position 1 (first setting) and turn
it slowly forward.
3. Push the crown back and put it in the initial position.
Movement caliber U-28: power reserve 38 hours.
TIME AND DATE SETTING:
1. Put the crown in the winding position and wind the watch if necessary by
turning the crown forwards until
it stops;
3. Date setting: pull gently the crown out to position 1 (first setting)
and turn it slowly forward until the desired date appears.
NOTE: date-setting is not recommended between 9 pm and 3 am.
4. Time setting: Pull the crown out to position 2 (second setting).
Turn the crown gently forward.
5. Push the crown back and put it in the initial position.
Movement calibre U-77: power reserve 44 hours.
CHRONOGRAPH FUNCTIONS:
1. Push the button A (Start/Stop) to put in motion the hands of the
chronograph and hour/minute totalisers.
2. Push again the button A to stop the chronograph. Press again to
restart the chronograph (additional function)
3. After reading the displayed total time, chronograph stopped,
push the button B to reset the hands of the chronograph and totalisers.