u-blox XPLR-M9, Manual

Page: 9 / 14

XPLR-M9 - User guide
5 Firmware update
The XPLR-M9 has the latest version of GNSS firmware at time of delivery. However, as newer
firmware versions may become available during the lifetime of the product, you might need to update
the firmware. This section shows how to update the firmware on XPLR-M9 if required. As firmware
update is not supported by u-start v.19.08.02 yet, you need to use u-center for necessary firmware
update. See u-center User guide [
1 ].
To update the firmware with u-center, connect via USB to u-center and poll UBX-MON-VER to view
the installed firmware, as shown in
Figure 4 .
Figure 4: Checking XPLR-M9 firmware version from u-center
To upload a new firmware follow the instructions below:
UBX-19041842 - R03 5 Firmware update Page 9 of 14
C1-Public