Interfaces
EVK-M91 can be used to evaluate all interfaces
available on the u-blox M9 chips and modules.
The evaluation unit provides a standard USB
connector for communication and powering the
device, and an RS232 connector for connecting
to the COM port on your PC.
SPI and the I2C interfaces are designed to ena-
ble communication with a host CPU.
Kit includes
• EVK-M91 evaluation board
• Type-C USB cable
• Active GNSS antenna with a 3 m cable
• Welcome card
u-center installation
• Internet connection is required.
• Supported Windows operating systems are
Windows 7 and onwards (x86 and x64).
• Unzip the downloaded u-center setup file,
run the extracted file, and follow the installer
instructions.
• When the installation is complete, the
u-center program is available in the Windows
Start menu > All programs > u-blox.
More information
See the recommendations in the EVK-M91
User guide when using the EVK with a GNSS
simulator.
For more information about EVK-M91, contact
your nearest u-blox support. For complete con-
tact information, visit us at
www.u-blox.com
.
