3. Kit includes
• EVK-M8QSAM, EVK-M8QCAM or EVK-M8CCAM unit
• USB cable
• Active GPS / Galileo / GLONASS / BeiDou antenna with a
3 m cable (only for EVK-M8xCAM)
5. Interfaces
The EVK-M8QSAM and EVK-M8xCAM kits provide a USB
connector for communication and powering the device, as
well as a UART connector for connecting to the COM port
of your PC.
The DDC interface (I2C compliant) is available for both the
EVK-M8QSAM and the EVK-M8xCAM.
Additionally, the EVK-M8xCAM supports optional SPI bus
connectivity (requires a jumper resistor) to enable commu-
nications with a host CPU.
7. More information
NOTE
: Refer to recommendations in the EVK user guide
when using the EVK-M8QCAM or EVK-M8CCAM with a
GNSS simulator.
For more information about the EVK-M8QCAM or EVK-
M8CCAM, contact your nearest u-blox support:
www.u-blox.com/contact-technical-support
UBX-16024579 - R03
4. Installation
Notes for downloading the EVKM8QSAM or EVK-M8xCAM
software package and running the installation:
• An Internet connection is required
• Supported Windows operating systems: Windows 7
onwards (x86 and x64 versions)
• Download the u-center evaluation software
•
Run the u-center installer executable file and follow the
installer instructions
•
When the installation is complete, you will find a
u-center menu under the Windows Start button,
All Programs > u-blox
6. u-center
The u-center GNSS evaluation software provides a powerful
tool for evaluation, performance analysis and configuration
of u-blox positioning products.
