3. Kit includes
• EVK-M10QSAM, EVK-M8QSAM, EVK-M8QCAM, or
EVK-M8CCAM unit
• USB cable
• Active GPS / Galileo / GLONASS / BeiDou antenna with a
3 m cable (only for EVK-M8xCAM)
5. Interfaces
All the kits provide a USB connector for communication
and powering the device, as well as a UART connector for
connecting to the COM port of your PC.
The DDC interface (I2C compliant) is also available for all
the kits.
Additionally, the EVK-M8xCAM kits support optional SPI
bus connectivity (requires a jumper resistor) to enable com-
munications with a host CPU.
7. More information
NOTE
: Refer to recommendations in the EVK user guide
when using the evaluation kit with a GNSS simulator.
For more information about the evaluation kit, contact your
nearest u-blox support:
www.u-blox.com/contact-technical-support
UBX-16024579 - R04
4. Installation
Notes for downloading the EVK software package and
running the installation:
• An Internet connection is required
• Supported Windows operating systems: Windows 7
onwards (x86 and x64 versions)
• For EVK-M8QSAM, EVK-M8QCAM, or EVK-M8CCAM
download the
u-center
evaluation software
• For EVK-M10QSAM download the
u-center 2
evaluation
software
•
Run the u-center or u-center 2 installer executable file
and follow the installer instructions
•
When the installation is complete, you will find a u-center
or u-center 2 menu under the Windows Start button:
All Programs > u-center
All Programs > u-center 2
6. u-center
The u-center GNSS evaluation software provides a powerful
tool for evaluation, performance analysis and configuration
of u-blox positioning products.
