u-blox ANT-B10, User Manual

Page: 14 / 29

ANT-B10 - User guide
UBX-22006906 - R02 C209 tags Page 14 of 29
C1-Public
u-blox C209
t
ag software can be installed using the DFU bootloader or an external debugger.
Precompiled packages for each installation option are available from the u-blox C209 software
repository
[13] .
Figure 9: C209 with enclosure
4.2.1 Installing tag software with the DFU bootloader using s-center
The C209 tags can be flashed over the UART using s-center [7] .
☞
Flashing requires s-center 6.1 or later.
Follow the flashing procedure outlined below when using s-center:
1. Download and unzip the u-connectLocate software container, as described in Installing tag
software with the DFU bootloader over the command line .
2. Open s-center on the correct COM port once the module is in the software download mode.
3. Select Software Update .
4. In the “Software Update” dialog, select the
app.zip
file from the software container, as shown in
Figure 10 . Make sure the flashing speed is set to 115200.
5. Press Update .