Tzora EasyTravel Elite, User Manual

Page: 20 / 40

Easy Traviel Elite - ET1-E 20 User Manual Li Rev.2019-12 en
7. BATTERIES AND CHARGING
Battery information
The EasyTravel Elite is designed to use sealed lead acid, maintenance-
free, 12V batteries.
Always turn your EasyTravel Elite OFF before removing and installing
batteries. To get the maximum out of your batteries, it is recommended to
fully charge the batteries overnight after every day of use. Reconnecting
the charger when the batteries are partially discharged or fully
charged will not harm them. Extended charging is good for the batteries
and you cannot overcharge them.
Battery range depends on operator weight, terrain and the condition of
batteries used. Charge your batteries daily and/or overnight when the
EasyTravel Elite is not in use.
Battery Recharging Instructions
To recharge, turn off EasyTravel Elite It is possible to either charge the
battery while connected on the EasyTravel Elite (see instruction 1 below)
or directly (instruction 2).
1. Plug the charging connector into the EasyTravel Elite charging
socket and then connect the charger to an electrical outlet socket.
2. Plug the charging connector in the back of the battery pack and then
connect the charger to an electrical outlet socket.
The indicator light is red when the power is on and the charger is not
connected to the battery. During charging, the indicator light on the
charger will be orange. When the battery is approaching full charge the
indicator light will turn green. In order to achieve the maximum battery
capacity and efficiency, it is advised to charge them overnight, and at
least four hours after the indicator light has turned to green.
When charging the battery pack using voltage converter, plug the voltage
converter into the light socket in your car and connect the battery charger
to the converter.
Safety Instructions
CAUTION: Failure to follow these instructions may result in personal
injury or property damage.