Tzora EasyTravel Elite ET1E, User Manual

Page: 17 / 24

EasyTravel Elite – ET1E User’s Manual Rev. 0708 17
8. GENERAL MAINTENANCE AND INSPECTIONS
Minimum maintenance should prevent unnecessary repairs.
Keep Your EasyTravel Elite Shining
Wipe the seat clean with a damp cloth. Protect the painted parts with a coat
of auto wax.
WARNING: Water or Excessive moisture around the controller unit or electri-
cal connections may cause contamination of electrical circuitry, damage and
malfunction as well as personal injury. Do not leave your EasyTravel Elite in
the rain or in excessively humid locations.
Daily Checks
With the EasyTravel Elite switched off, check that the hand control lever me-
chanism returns to the rest position when you push and release. If there is a
problem do not use the EasyTravel Elite and contact your authorized dealer.
Weekly Checks
1. Throttle test: Pull the throttle to the full speed position and switch ON
the Power switch. The EasyTravel Elite should not move and the LED
on the panel should flash. If the EasyTravel Elite does move – do not
use your EasyTravel Elite . Contact your authorized dealer.
2. Automatic brake and drive test: This test should be carried out on a
level surface with at least 3’ / 1 m. clear space around the EasyTravel
Elite :
Switch the EasyTravel Elite on.
Move the control lever only slightly in the forward direction until you hear a
“click” when the brake disengages. The EasyTravel Elite should start to
move forwards slowly.
Immediately release the throttle. You must be able to hear a “click” when
the brake engages back, within a few seconds.
Repeat the test in the reverse direction.
If you do not hear the brake operating, or the EasyTravel Elite does not move
slowly in the expected direction – do not use your EasyTravel Elite . Contact
your authorized dealer.