How to use
a. Start recording
b. Mark
c. Stop recording
d. Turn on/off Bluetooth
e. Get report
f. Switch on or quit Flight Mode
After recording,there are two ways to get
report:connect the device with USB port of
PC or using Temp Logger App on smart
phone,it will automatically generate PDF
and CSV report.
Make sure the sensor is completely insert into
the device.Press and hold the left button for
more than 3s until the led light turns green,and
the “
▶
” or “WAIT” displays on the screen,
which indicates the logger is started.
When the device is recording,press and hold
the left button for more than 3s,and the screen
will switch to the “MARK” interface.The number
of “MARK” will increase by one,indicating data
was marked successfully.
Press and hold the right button for more than 3s
until the led light turns red,and the “■” displays
on the screen,indicating stop recording
successfully.
Press and hold the two buttons for more
than 3s at the same time,until the red light
flashes quickly, and the “
” displays on
the screen or disappears,indicating the
bluetooth was turn on or off.
Switch on: by Temp Logger App.
Quit: press and hold the two buttons for
more than 3s at the same time,until the red
light flashes quickly, and the “
”displays
on the screen,meanwhile “
”disappears.
