TZONE DIGITAL TAG06, User Manual

Page: 24 / 36

TZ-AVL11 User Guide
V1.0.6 Nov 28 ,2016
30 Extend Setting * $$$$$$ ,118,ABCDEFGH# B=0, Disable send the interval
GPRS data normally when Input
1(Port 4) close(Default)
B=1, Enable send the interval GPRS
data normally when Input 1 (Port 4)
close
A=C=D=E=F=G=0, reserved
31 Acceleration and deceleration
alarm
* $$$$$$ ,120,A,B,C# A=0 Disable this function
(Default)
A=1 Active this function.
B= [0,2000] Acceleration 0.1m/S’2
B=
[0,2000] deceleration
0.1m/S’2
32 Roaming sending GPRS data
interval time * $$$$$$ ,121,X,Y# X=0 Disable this function
(Default)
X=1 Active this function.
Y=[0,999] Roaming time interval
(Unit: sec)
33 According to the digital input1
state decided to time intervals of
GPRS Data * $$$$$$ ,127,X# X=[0,6000]seconds,input1no
detection to high level (engine off)
time interval
34 Open the RF (receive TAG06 or
TAG06B) * $$$$$$ ,136,X# X = 1,open the RF.
X = 0 ,close the RF.
35 Open TAG06 battery voltage
display * $$$$$$ ,139,X# X = 1 , open the TAG06 battery
voltage display
X = 0 , close the TAG06 battery
voltage display
36
Set the receive rate for the
TAG module
* $$$$$$ ,140,X# X=0, 1K
X=1, 2K
X=2, 10K
X=3, 38.4K(default)
X=4, 100K
37 Angle Alarm * $$$$$$ ,400,X,Y# X=0, Disable this function
(Default)
X=1, Active this function.
Y= [1,360] Angle range
38 Clear data flash * $$$$$$ ,500# Clear stored in the flash memory
inside the machine
39 Reboot time * $$$$$$ ,600,X,Y# X=0,Disable this function
(Default)
X=1, Active this function.
Y= [10,9999]/ Minutes,
Reboot time interval