© 2021 TytoCare All rights reserved.
21 of 76
TytoPro General Operation User Guide
First Time Setup
First Time Setup
What do I need to start working with the Device?
l
A Wi-Fi network, secured by a known password, that you can connect to, or a Personal Hotspot
on your mobile device.
l
Tyto Device, fully charged.
l
TytoApp, installed on any of the following mobile devices:
l
iOS: iPhone 5S and up, iPad Air and up, iPad mini 2 and up, iPod touch 6 and up.
l
Android: Samsung Galaxy S5, S6 plus, Note 5, A7, J7 and up, LG G4 and up.
l
Internet access via the Wi-Fi network.
l
For best performance, the following connection speed is recommended: Download 20 Mbps \
Upload 5 Mbps.
l
At minimum, the following connection speed is required: Download 2 Mbps \ Upload 2 Mbps.
Note
: If the iOS mobile device supports Hotspot with a stable LTE connection, it can be
used instead of a Wi-Fi router.
Pairing the Device and TytoApp
In order to start using the Tyto Device, you must perform a short pairing process between the
Device and your mobile device App. This pairing enables the communication between the two
devices, over the Wi-Fi network or Hotspot. This process is done once per Device. If you change
your Wi-Fi password, change your Wi-Fi router or make any other change to your wireless
network, you will need to pair the Device again.
Before pairing, make sure that your mobile device is connected to your Wi-Fi network, which has
an internet connection, and make sure that you know its password.
Note
: If your Wi-Fi network is not secured by a password, you will not be able to pair the
Device and App.
