background image

 

General Information 

 

ABOUT THIS MANUAL 

The purpose of this user’s manual is to provide general information on TYSSO’s 

POS Terminal and to show the users how to configure the hardware-related configurations. 

The information in this manual is subject to change without notice due to rapid improvement on 

IT technology. Users can get the most up to date information from our web sites: 

U

http://www.fametech.com.tw

U  

 

DISCLAIMER 

This manual has been examined for accuracy. While precaution has been taken in the 

preparation of this manual, neither the manufacturer takes no liability for errors or omissions nor 

assume any responsibility for damage(s) incurred directly or indirectly from errors, omissions, or 

discrepancies of this manual. 

IN NO EVENT WILL THE VENDOR BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, 

INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY 

TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF THE POSSIBILITY OF SUCH 

DAMAGES HAS BEEN ADVISED. IN PARTICULAR, THE VENDOR SHALL NOT HAVE 

LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE 

PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, OR RECOVERING 

SUCH HARDWARE, SOFTWARE OR DATA. 

 

WARNING 

The terminal has been tested and found to comply with the limits for a Class a digital device, 

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection 

against harmful interface in a residential installation. This equipment can generate and radiate 

radio frequency energy and, if not installed and used according to the instructions, may cause 

harmful interference to radio communications. However, there is no guarantee that interface will 

not occur under particular installation. If this equipment does cause harmful interference to radio 

or television reception, which is found by turning the equipment off and on, the user is 

encouraged to try to correct the interface by one or more of the following measures: 

 

  Reorient or relocate the receiving antenna.

  Increase the distance between the equipment or device.

  Connect the equipment to an outlet other than the 

receiver’s.

  Consult a dealer or an experienced radio/TV technician for assistance.

Summary of Contents for POS-1000 Series




















Reviews: