Tysso BLP-300, Instruction Manual

Page: 25 / 27

- 22 -
3 Gap Sensor Calibration
User needs to start the calibration of the gap sensor
sensitivity after loading a different type of label roll or the
printer is initialized.
The calibration is to perform when:
1. New printer first in use.
2. Label stock changed.
3. Printer initialization.

Calibration Method
There are two methods to calibrate the Gap Sensor:
A. Through Driver Property:
Set label paper dimension, label gap in Driver Property, click
Apply and then print a label. After printing, printer will
calibrate the label automatically, label parameter will be
written into memory.
B. Through sending commands
：
Write label paper dimension and gap into program and then
print a label. The printer will calibrate the label paper
automatically.