6
2.3. FN Key + Numeric Key
FN+0 (Backlight Switch)
: When operating under a low-
light environment, press “
FN
” key then press
“
0
” key; it would turn on the LCD backlight so as to acquire better images.
Press “
Fn
” key then press “
0
” key again to turn off the backlight.
FN+9 (Scan Mode)
: Press “
FN
” key then press “
9
” key to set the Scan mode when press the Scan button:
Preset Mode:
Press the Scan button and scan light is turned on;
after the barcode is read successfully (or over 2 seconds and the barcode
has not been read), the scan light is turn off.
Continuous Mode:
Press and hold the Scan button and scan light is turned on until the scan
button is released or the barcode is read successfully.
Main Menu
:
Fn+1 (Auto Save Data Mode)
: Press “ESC” and return to the Main Menu.
Press “
FN
” key then press “1” key to access the Auto Save Data Mode; it
would allow user to set the BCP unit to upload the data automatically when
place the unit onto the cradle.
Please refer to the
Appendix: Auto Upload Data (USB Type Only)
for
further instructions.
Fn+2 (Custom Logo)
: Press “ESC” and return to the Main Menu.
Press “
FN
” key then press “2” key to enable/disable custom logo
(start image) when turn on the BCP unit.
Fn+3 (Show Last Code):
This Function can show the last scanned data on the display when
the field is set “Auto Enter On”.
1. Show Last Code (default):
the scanned data will display on the screen and the unit is ready
for next scan.
2. Clear:
the scanned data is cleared and the unit is ready for
next scan.
