An error message indicating
a problem with the TysonBio
SUPERB Test Strip.
Battery power is too low for
further usage.
Battery power is low. Meter
will provide approximately 50
more measurements.
Review the instructions and try
again with a new TysonBio
SUPERB Test Strip.
Replace with a new 3-Volt
lithium battery (CR-2032)
immediately.
Replace with a new 3-Volt
lithium battery (CR-2032).
DISPLAY
WHAT IT MEANS ACTION
An error message indicating
a problem with the coding of
TysonBio SUPERB Meter.
An error message indicating
a problem with the TysonBio
SUPERB Meter.
Indicate the result is HIGHER
than the “HI alarm setting” of
the health management.
Check the meter again with the
Glucode Chip. If the problem
persists, contact Tyson Biore-
search, Inc. Customer Service
for help.
Press “reset” button and check
the meter again with the
Glucode Chip. If the problem
persists, contact Tyson Biore-
search, Inc. Customer Service
for help.
For your reference or you can
change the default setting
value 100 mg/dL according to
page 20.
AM
Mem
mg/dL
Code
DISPLAY
WHAT IT MEANS ACTION
41
42
