EN – 30
Charging Cycles and Lifespan:
Due to the use of high-quality lithium-polymer batteries, it is ensured that
the battery running times still meet the requirements even after many
charging cycles. Nevertheless, no guarantee can be given for the lifespan
of batteries going beyond 6 months after the date of purchase.
If you adhere to the following advice, you can certainly save the battery of your device
and thereby extend its lifespan:
Avoid direct exposure on the PABLO® Sensors to sunlight in order to prevent
the battery inside the device from becoming too hot.
Battery life:
In use, the battery service life is approximately 8 hours (when fully charged); thereafter
the battery will have to be charged again.
2.3.8
Switching the PABLO® Sensors on/off
A short push of the switch turns on the PABLO® Sensors. The system vibrates briefly. The
PABLO® Handsensor and the PABLO® Motionsensor are ready for use approx. 3 seconds
after being switched on.
If a PABLO® Sensor is disconnected from the software for more than an hour, it will
switch off automatically.
If a PABLO® Sensor is placed on the PABLO® Charger, it will switch on automatically and
change into charging mode (see LED display described in chapter 2.3.6).
