TYROLIT
Hydrostress AG
Page 19
DME36MW
/ DME36UW
Fault information
If an automatic shut-off has occurred because of a fault and a restart is not possible, the fault in-
formation may help.
X
Press main switch for 5 seconds.
X
Note the status of the coloured LEDs and follow the instructions in table 6.4.2.
Fault information
Fault information table
Fault information
Main switch illumi-
nates in red
no signal
no fault
LED 1, 2 illuminate
X
Notify TYROLIT Hydrostress
AG of the status of the col-
oured LEDs
LED 3 illuminates
LED 1, 3 illuminate
LED 2, 3 illuminate
LED 1, 4 illuminate
LED 2, 3, 4
illuminate
LED 1, 2, 3
illuminate
X
Allow motor to cool down
and restart
LED 4 illuminates
X
Allow motor to cool down
and restart
6.4.1
6.4.2
