TYROLIT
Hydrostress AG
Page 6
DME33MW
/ DME33UW
Danger and working area
Danger zone at electrical tool
The marked area on the drawing defines the danger zone of the electrical and cutting tool.
The minimum clearance of 15 cm must be maintained during operation.
Danger zone at electrical tool
Danger zone at workplace
Information about the danger zone at the workplace can be found in the “Core Drills Safety
Manual / System Manual”.
Product-specific dangers
Personal protection device (RCD, PRDC, GFCI)
Only ever work if a serviceable current-operated personal protection device is
present (PRCD, GFCI).
Personal protection device
DANGER
Failure to comply will result in a risk of death or serious injuries
X
Keep your electrical tool away from rain and moisture. Water penetrating an electrical tool
increases the risk of electric shocks.
X
It is not allowed to work without current-operated personal protection device.
Overhead drilling
X
Overhead drilling is not permitted in wet conditions.
2.3
2.3.1
2.3.2
2.4
2.4.1
2.4.2
