TYROLIT
Hydrostress AG
Page 6
DME20PW
/ DME20PU
Personal safety
• Be attentive, pay attention to what you do and go to work with the electric tool with
reason. Do not use an electric tool when you are tired or under the influence of drugs,
alcohol or pharmaceuticals.
One moment of carelessness while using an electric tool kann
cause serious injuries..
• Wear personal protective equipment and always goggles.
The wearing of personal
protective equipment, like dust mask, skid-proof shoes, protection helmet or hearing protec-
tion, depending on the kind and use of the electric tool reduces the risk of injuries.
• Avoid unintended start up. Make sure that the electric tool is switched off before con-
necting it to the mains and/or the battery, picking it up or carrying it.
When you have
your finger on the switch while carrying the electric tool or connect the device to the mains
when it is switched on, this can cause accidents.
• Remove adjusting tools or wrenches before switching on the electric tool.
A tool or
wrench which is located on a turning device can cause injuries.
• Avoid abnormal posture. Care for safe standing and keep the balance anytime. Do not
work on a ladder.
Thus you can control the electric tool better in unexpected situations.
• Wear suitable clothing. Do not wear wide clothing or jewelry. Keep hair, clothing and
gloves away from moving parts.
Wide clothing, jewelry or long hair can be caught by mo-
ving parts.
• If there is the possibility to assemble a dust exhauster and collecting device, make sure
that these are connected and used correctly.
The use of a dust exhauster can reduce
dangers by dust.
Use and handling of the electric tool
• Do not overload the device. Use the appropriate electric tool for your work.
With the
appropriate electric tool you work better and saver in the declared range of performance.
• Do not use an electric tool whose switch is damaged.
An electric tool which can not be
switched on and off is dangerous and has to be repaired.
• Unplug the plug from the socket and/or remove the battery before carrying out instru-
ment settings, exchanging accessories or put the device aside.
This safety measure avoids
the unintended start of the electric tool.
• Keep unused electric tools out of reach of children. Do not allow persons to use the de-
vice who are not familiar with it or have not read these instructions.
Electric tools are dan-
gerous if they are used by inexperienced persons.
• Maintain electric tools with care. Check if movable parts function correctly and do not
jam, if parts are broken or damaged in that way, that the function of the electric tool
affected. Have damaged parts repaired before using the device.
Many accidents originate
from bad maintained electric tools.
• Keep the cutting tool sharp and clean.
Carefully maintained cutting tools with sharp edges
do jam less and are easier to guide.
• Use electric tool, accessory, operation tools, etc. according to these instructions. Thereby
consider the conditions of employment and the work to be done.
The use of electric tools
for others than the intended task can result in dangerous situations.
2.1.3
2.1.4
