Tyro Pro EFTPOS machine user guide
5
4. Getting set up
4.1 Installing and charging the battery
The battery provided is designed specifically for your Tyro Pro machine.
1. Before plugging in your machine, turn your machine over and unclip the battery door by pushing the clips as
shown in the picture below.
2. Find the battery pack included in the box and place in the back of the machine.
3. Attach the battery door.
We recommend fully charging the battery before first use. When used daily, the machine charges its battery each
time the power adapter is connected.
To charge your battery:
• Connect the power adapter provided to the machine USB type-C connector
• Connect the power adapter to the power supply
• The battery icon on the top of the screen will show that it is charging
4.2 Inserting a paper roll
The Tyro Pro uses the same paper roll as the Tyro Mobile EFTPOS machines. Paper rolls can be purchased via the
Tyro App or Tyro Portal. To insert a paper roll:
Note: Only use paper rolls provided by Tyro – unapproved paper rolls may damage the printer in your machine.
1. Open the paper cover by lifting the catch located at the top of your Tyro Pro and pull the cover down towards
the back of the machine.
2. Insert the paper roll following the picture below.
3. Pull the paper so that you can see the receipt paper when you clip the cover into position.
Advice: when inserting a new paper roll, tear of the first length to avoid printing on the adhesive area.
1
2
1
2
3
3
