Tyro Fornax Basic Forestry Winch Control
Manual, standard 868 MHz version
Tyro Remotes
Tel: +31-(0)546-588790
Bedrijvenpark Twente 1B
Fax: +31-(0)546-579490
7602 KA Almelo
E-mail:
Nederland
Website:
Functions of the transmitter:
Fornax Basic
Fornax Basic - Safe
Wind up
Unwind / continuous
(after the switch is pressed down for 3 seconds).
The continuous function is cancelled with the wind-up function.
In that case the wind-up function does not immediately become active, but only when pressed
again.
Transmitter on
- Press the toggle switch in the direction of the symbol for 1 second.
Transmitter off
- Press the toggle switch in the direction of the symbol for 1 second.
Active emergency call
- Press the toggle switch in the direction of the symbol for
5 seconds.
The emergency call output can be reset by switching the transmitter back on.
Emergency stop, all the functions that are switched on will switch off.
The emergency stop button is only active as long as the transmitter is on.
Status LED on the transmitter
LED
flashes green:
Only during transmission.
LED
flashes red:
During transmission if the battery capacity falls below 10%.
LED
briefly
lights up red
when switching on the transmitter:
A function button is active, there is an unsafe situation. Now the transmitter will not switch on.
Changing the battery
If the status LED onthe transmitter flashes red during transmission, the 9V battery must be replaced
within the next few days.
