Tyredog TD2700F Adding A Relay / Programming Sensors Download Page 3

Page: 3 / 3

Then it will display SET TIRE ID TRUCK HEAD and

your selected Layout will be shown.

Now insert a battery into the sensor.

The Monitor will beep once the battery is

inserted and the wheel location on the monitor

will go solid black. Repeat this step for the rest

of the sensors until they are all programmed in.

Once all sensors are programmed in, press the

reset button on the relay once (short press) and

the LED on the relay will turn off to exit learning

mode.

Now either switch the monitor OFF and ON using the switch on the side of the monitor.

Press the Backlight (Right) button then the Temperature (Middle) button to exit the menu on the

monitor.

Test all sensors are working and programmed and set the Alarm Warning Thresholds if required.

Summary of Contents for TD2700F

Page 1: ...ton to enter this menu TYPE of TRUCK HEAD and your current Layout No will be displayed Use the Mute Left or Temperature Middle button to scroll through the vehicle layouts until you find your new layo...

Page 2: ...k to the settings menu The Layout and Relay has now been saved to the Monitor and Relay and you can now program in the sensors Step 2 Programming Sensors Press the Mute Left button to scroll across to...

Page 3: ...nsors until they are all programmed in Once all sensors are programmed in press the reset button on the relay once short press and the LED on the relay will turn off to exit learning mode Now either s...