Press the Backlight (Right) button to enter this
menu.
PUSH BUTTON ON RELAY TRUCK HEAD your
current Layout No. will be displayed.
Now Press the reset button on the relay once
(short press only). This will program the relay to
the system.
The Monitor will beep and will briefly show an
ID for the relay for a couple of seconds.
Note:
If you have Trailer Relays, press the Left
Mute button to program the Trailer Relay also.
Now press the Backlight (Right Button) and this
will take you back to the settings menu.
The Monitor and Relay(s) are now programmed.
Now either switch the monitor OFF and ON using the switch on the side of the monitor.
Or
Press the Backlight (Right) button then the Temperature (Middle) button to exit the menu on the
monitor.
Test all sensors are working and programmed and set the Alarm Warning Thresholds if required.
ID: 0012A6
