19
stop,or press “N2+” key to set free stop, or press “N3+” key to set “end
stop” state.
3)
Press “Set” key to confirm the change. The display stop blinks.
Note:
“Stitch-counted Sew” will not consider the setting of left/right stopping.
2.15 Needle Up/Down Stopping
When the “Up /Down Stop” indicator lights on, the needle will stop at up position
at the end of sewing. If not, it will stop at down position. Press “Up Down Stop
Switch” key to switch between the two state.
The default set is up stop positioning for the machine.
2.16 Flip
operation
For example, in normal state, set down stop position. Then operate as following
steps:
1)
Press the “Standard Pattern 5” key. The indicator nearby that key will
turn on.At same time the main display area show 5-3- for a second and
show the work width of the pattern after that.
2)
Press “Set” key. The width data in main display area will blink. At this
time you press the Standard Pattern 5 key, the main display will show
pattern shape code “5-3-”.
3)
Press “N2+” key to select flip operation, this makes the main display
show “5-3A”.Here you can press “N2-” key to unselect flip function, that
makes the main display show “5-3-“ again.
4)
Press “Set” key to confirm you choice.
5)
Press pedal to start sewing.
6)
Stop sewing, rotate cloth by 90 degree.
7)
Press “Reverse Button ” to flip the stitch shape.
8)
Press pedal again to start flip sewing.
2.17 Stitch-counted
Sew
■
Operation Steps
1)
Press “Stitch-counted Sew” key in the normal state, the indicator nearby
the key will be lit up. The main display will show the number of stitches
in vertical side.Such as “E-**”. If you want to change this value, press
the corresponding “+”/ “-” key. The biggest stitch number is 99.
2)
Press “Stitch-counted Sew” key again, the main display will show the
