POWER
Two power options available
12V plug-in power adapter
12V hardwire
3A fuse
1) Select your desired power connection
and connect to the Plug & Glow
TM
Smart
Lighting Hub Controller
2) Connect LED Trim Light with extension
cable to the Smart Lighting Hub
Controller.
bb
ON/OFF
a
bb
b
a
+
-
• Connect the Trim Light to the Extension
Cable
• Peel off the 3M
TM
double-sided tape on the
back of the LED emitter and place it on the
dash board.
• Requires Plug & Glow
TM
Automotive
72” Smart Trim Lighting Kit to operate
• Connect LED Trim Light with extension
cable to the Smart Lighting Hub Controller.
Note:
• For use with 12V power only
• Suitable temperature for
installation is 70°F (21°C) or above.
LED Trim Light
Extension Cable
Smart Lighting
Hub Controller
(sold separately)
NOTE: Match arrows
indicated for correct
orientation. An incorrect
connection will cause
lights to malfunction.
Smart Lighting
Hub Controller
(sold separately)
