TyrePal Limited, Unit 2 Glen Industrial Estate, Essendine, Stamford, PE9 4LE. United Kingdom
Tel: +44 (0)1780 755490 e-mail: [email protected] www.tyrepal.co.uk
© TyrePal Ltd 2013
TCTH 20130226
6
3
REGISTER SENSORS
Sensors are interchangeable and can be registered to any of the possible wheel positions.
In the Standby mode, use a number button to select the tyre position where a sensor is to
be registered. The selected tyre position flashes. Place the reader programmer close to
the sensor and press the INPUT button. The display will show ‘Reading ID’
If it is coded successfully, the sounder will beep once and the display will show the sensor
ID, together with pressure and temperature data. If it fails to code successfully a double
beep will sound and the display will show the word ‘Failure’ for ten seconds.
If a sensor is coded repeatedly, it will delete the previous record.
4
READ SENSOR DATA
In standby mode, press the UP or DOWN keys
repeatedly to cycle through the wheel positions and
display the sensor ID together with the current tyre
pressure and temperature data.
You can also select a specific wheel position directly
with the numerical keys.
Data is displayed for 10 seconds and then the read-
er reverts to the standby display.
