background image

1.

 

Product Overview

1.1.1 Product Introduction

Thank you for choosing our tire pressure monitoring system, which is composed of 
sensors and monitor. 
The system is used to detect the air pressure and temperature of each tire in real time. 
The collected pressure and temperature data will be sent  to the monitor by means of 
radio frequency. After the data is received and processed by the monitor, it will be shown 
on the monitor screen to remind the user to avoid traffic accidents. The corresponding 
alarms will be issued for different abnormal situations according to the standard pressure 
and temperature alarm values set by the user.
The system can improve the comfort of the vehicle, reduce fuel consumption and vehicle 
wear, improving dynamic performance.

Be sure to read the user instruction carefully before installation and keep the 

instruction for future use. Thank you!

1.1.2 Safety Warnings

Before installing the product, please read the following precautions.

1.2.1 The monitor should be installed in a location where it will not affect the driving vision.
1.2.2 The monitor should be reinforced to avoid falling during driving.
1.2.3 While driving, if the tire temperature rises sharply, the tire pressure will also rise  
accordingly. If the temperature exceeds the warning value, stop the car to let it dissipate 
the heat naturally to prevent brake failure or tire burst.
1.2.4 If the pressure continues to rise or drop at an accelerated rate while driving, stop to 
check for air leaks or other problems.
1.2.5 When the air pressure is too high, you should be aware of a tire blow

 

out. When 

the air pressure is too low, you should pay attention to fuel consumption and balance.
1.2.6 This product can effectively monitor the tire pressure and temperature in real time, 
but cannot avoid traffic accidents or tire blowouts. Using high-quality tires is as important 
as this product to ensure that the tire pressure is normal.
1.2.7 When checking the displayed pressure and temperature values, please pay 
attention to driving safety.
1.2.8 This product will automatically detect the tires and sound an alarm in case of 
abnormal situations, so that the driver does not need to pay frequent attention to it so as 
not to be distracted while driving.

Summary of Contents for TM527M


















Reviews: