TYM T433, Operator'S Manual, Page: 50 / 120

Only use drawbar to tow and keep the 3 point linkage in raised position when
toeing with the drawbar.
Position can create unbalance causing the Tractor to roll-over & Result the death
or serious injury.
Danger
► ► ► ►
MOUNTING IMPLEMENT
► ► ► ►
ADJUSTMENT OF THE LIFT LINK ON THE LOWER LINK
For different applications change the position
of the lift rod on the lower links as shown and
insert the pin in the direction of the arrow.
49
Caution
Do not attach a PTO shaft with the engine running and ensure all safety shields
are in place.
► ► ► ►
MOUNTING IMPLEMENT
If the PTO is used, remove the safety cover off the PTO shaft.
Adjust the yoke rod on the lower links to suit the implement in
use.
Attach the left lower link, then attach the right lower link
using the adjusting handle on the leveling box if required.
Attach the top link.
Attach the PTO shaft to the tractor if used, making sure that it
is locked in place.
Adjust the check chains to suit the implement and tighten the
locknuts.
To remove an implement reverses the procedure