Tylo Elite, Quick Start Manual, Page: 5 / 8

Overview
The overview screen is shown both when the heater is switched off (Figure 7) and when it is on (Figure 8).
Temperature setting
Current temperature
Current relative air humidity
(only shown if the temperature/
humidity sensor is connected on
the Combi and Tylarium models)
Current time
Remaining sauna
time
Water level in the tank (applies to
the Combi model)
Air humidity setting
Fig. 7 Fig. 8
Fig. 9
Home
Get to the Home screen (fig. 9) by touching the screen in the Overview mode or by pressing the Home
button. The Activity buttons are used to start and stop the heater. A Standby button is also shown. When one
of the activity buttons is pressed, the colour changes to indicate the current status.
Activity/Status buttons
On
Standby
:
Off
Functions/Settings buttons
Shows that the panel is
connected to Wifi (only the
Elite Wifi model)
12 13
EN