Tyler Refrigeration NCSGX, Installation & Service Manual

Page: 13 / 18

Installation & Service Manual
NFX, NFSX, NCSX,
NFSGX, NCSGX
Page 13 November, 2007
CLEANING AND SANITATION
Component Removal and
Installation Instructions for
Cleaning
Bottom Trays
1. Remove product from bottom of case.
2. Grasp and lift out each of the bottom trays
from the case interior and carefully
remove through the door openings
3. After cleaning, replace in reverse order.
NSF Product Thermometer
Remove four screws and product thermome-
ter bracket assembly from right rear location
in the case. After cleaning, replace product
thermometer bracket assembly and secure
with four screws.
Discharge Air Honeycomb
1. Remove screws and bottom retainer strip
from front or rear interior of case.
NOTE
Note position of the honeycomb grid
during removal so it can be reinstalled
the same way.
2. Remove honeycomb grid sections from
the front or rear duct.
CAUTION
Improper installation of the honeycomb
grid section could result in improper air
flow and/or poor refrigeration.
3. After cleaning, replace honeycomb grid
sections as they were removed and
secure with the bottom retainer strip
and screws.
Rear Duct Panels
1. Remove bottom trays and discharge air
honeycomb, see this page.
2. Remove mounting screws from rear
duct panel.
3. After cleaning, replace in reverse order.
Front Air Duct Panels
1. Remove bottom trays, see this page.
2. Remove screws and front air duct panels
from case.
3. After cleaning, replace in reverse order.
Rear Riser Canopy Cover
(NFSX/NCSX/NFSGX/NCSGX)
1. Remove screws and rear riser joint trim.
2. Remove screws, price tag molding and
rear riser canopy cover from top of case.
3. After cleaning, replace rear riser canopy
cover and remaining components in
reverse order.
Front Cladding
1. Remove front kickplate and raceway
cover.
2. Remove screws from bottom and top of
front cladding and pull cladding down to
remove it from behind the bottom edge
of the bumper retainer.
3. After cleaning, replace front cladding
and remaining front components in
reverse order.